Skip To Content

Hoshizaki KMH-2100SRJZ with URC-22FZ, Crescent Cuber Icemaker, Remote-cooled

Model: KMH2100SRJZ

Hoshizaki KMH-2100SRJZ with URC-22FZ, Crescent Cuber Icemaker, Remote-cooled Stainless Steel KMH2100SRJZ Picture

Color : Stainless Steel

KMH-2100SRJZ with URC-22FZ, Crescent Cuber Icemaker, Remote-cooled KMH2100SRJZ
Stainless Steel

Key Features

  • Stack 2 units for 2x the ice production

  • Produces crescent shaped ice cubes

  • Dimensions: 36″ W x 40″ D x 36- 7/16″ H

  • Up to 2034 lbs of ice produced per 24 hours

  • Durable stainless steel exterior

  • Compatible bins & dispensers, sold separately: Kloppenberg 2115

  • EverCheck alert system

  • CycleSaver design

Read More

Available from Testing Website, serving customers throughout Charlotte.

Features
Specifications

Features

Stack 2 units for 2x the ice production

Produces crescent shaped ice cubes

Dimensions: 36″ W x 40″ D x 36- 7/16″ H

Up to 2034 lbs of ice produced per 24 hours

Durable stainless steel exterior

Compatible bins & dispensers, sold separately: Kloppenberg 2115

EverCheck alert system

CycleSaver design

Protected by H-GUARD Plus Antimicrobial Agent

R-404A refrigerant (8 lbs. 6 oz. / 3799 g)

Heat Rejection:22600 BTU/hr

Ambient temperature range: 45 – 100°F

Water temperature range: 45 – 90°F

Water pressure: 10 – 113psig

Voltage range: 187 – 253V

15.1 amps (30 Amp Max fuse)

3.75 kwh/100 lbs.@ 90/70

Single phase, 208-230v/60/1, 4 wire, including ground. If neutral is not available transformer kit (HS-5030) is required

ENERGY STAR qualified

Three Years: Parts & Labor warranty on entire machine.

Five Years: Parts & Labor warranty on evaporator.

Specifications

Weight415 lbs
Dimensions X X in
Height-
Width-
Depth-
Shipping Weight-
Warranty|Three Years: Parts & Labor warranty on entire machine.||Five Years: Parts warranty on Compressor, air-cooled condenser coil.
Certifications-
Energy Star® Qualified-
Electrical SpecsSingle phase, 208-230v/60/1, 4 wire, including ground. If neutral is not available transformer kit (HS-5030) is required, Amperage: 15.1, Max Fuse/HACR Breaker: 30 A
Plumbing Specs1/2" FPT Inlet, Minimum 3/8" Nominal ID Copper Water Tubing or Equivalent, 3/4" FPT Outlet, Minimum 3/4" Nominal ID Hard Pipe or Equivalent
Utility Consumption3.75 kWh per 100 lbs @ 90/70, 15 gal of Potable Water per 100 lbs @ 90/70

Number of Boxes, Shipping Dimensions, & Shipping Weight

Number of Boxes1
Shipping Width-
Shipping Height-
Shipping Length-
Shipping Weight455 lbs
Total of Shipping Weight455 lbs
SourceCalculation

Cubic Feet Measurement & Dimensional Weight

Cubic Feet Measurement-
Dimensional Weight-
Total of Cubes-
Total of Dimensional Weight-

You might also like these best sellers...